click to enlarge

The MaxiBurn Power Tube Burn-in Station is a 2U rack mountable or bench top unit for heating 30 octal base power tubes. Designed for continuous use heating standard power pentodes to normalize their characteristics before testing or matching, the MaxiBurn powers the tube filaments and drives a nominal plate current through each tube. Normal function of each tube is indicated by an ‘active’ LED next to the tube socket.

Features

  • Stabilize tubes before matching for more accurate results
  • Improve reliability by eliminating early failures
  • Visual indicator on each tube to sort out failed tubes
  • Save money on third-party matching costs
  • Create your own label tubes
  • 120VAC or 240VAC

Only $1450

AC Voltage Selection


MaxiBurn Specifications

The MaxiBurn mounts 30 tubes in 6 strings of 5 tubes each. So as to reduce the size of the power supply, it uses a 35 VDC filament voltage to heat the tubes in each string in series. Therefore a minimum of 5 tubes must be installed in any one string in order to heat any tube.

Compatible Tube Types 6L6, 5881, EL34, 6V6, 6550, 6CA7, 7581, KT88, KT90, KT100, 7027
Optional Tube Types
EL84, EL509, 6BQ5, 7027, 7189, 7591, 7868
(adapter required) click here for adapters
Plate Voltage 100 VDC
Filament Voltage 35 VAC
Filament Current 10 Amps maximum filament power
Protection AGC 10 amp mains fuse
AC input 120 VAC, 75 watts max. input power (100, 240VAC available)
Dimensions 17 x 14 x 3.5 inches
    
  MaxiBurn
  Ultimate Power Tube Burn-in Station
  MaxiMatcher II
  Digital Power Tube Matching Station
  MaxiPreamp II
  Ultra Precise Digital Preamp Tester
  Adapters
  High Quality Adapters
learn more learn more learn more learn more
• Stabilize tubes before matching for more accurate results
• Improve reliability by eliminating
early failures
• Visual indicator on each tube to sort out failed tubes
learn more...
• Instantly identify weak or damaged
power tubes
• Accurately measure a tubes
amplification quality
• Precision-match tubes for plate current and transconductance
learn more...
• Measure preamp tubes for Gain, Transconductance and Noise
• Test any common dual or single
preamp triode
• Audition tubes with dual-RCA Direct Audio Output
learn more...
• Adapt non-standard pinouts to
the testers
• Adaptors available for power tubes and for preamp tubes
• SocketSavers for preserving your investment
learn more...
      © MaxiTest, LLC. All rights reserved.
      
HOME | ABOUT US | PURCHASE | CONTACT