Accessories for your Maxi-Matcher Digital Tube Tester
The Socket Saver can extend the life of your Maxi-Matcher. This adapter plugs into each socket of your Maxi-Matcher. Tubes to be tested are then pluged into the Socket Saver which takes all the wear of inserting and extracting tubes. If the Socket Saver becomes worn, simply replace the Socket Saver instead of your whole Maxi-Matcher.
|
|
The Socket Saver comes as a kit with hold down screws and spacers. Threading the included screws in place of the screws in the Maxi Matcher converts the Maxi-Matcher with Socket Savers into a single rugged test instrument.
Even Better! Order your new Maxi-Matcher with Socket Savers installed.
|
300B/2A3 Adapters NOW AVAILABLE Test directly heated triodes on your maximatcher. Test both Plate Current and Transconductance. Since the Maximatcher does not have isolated filament windings only one 300B or 2A3 adapter can be used per Maximatcher.
 |
 |
Maxi-Matcher Adapters Available |
||
|---|---|---|
| Maxi Socket Savers | One per socket,comes with mounting hardware Order 4 for your Maxi-Matcher |
US$35 each US$125 installed on new Maxi-Matcher |
| Octal Types | 7027 7591 |
US$20 each US$20 each |
| Miniture Types | EL84/6BQ5 | US$35 each |
| Directly Heated Triodes (one per Maximatcher) |
300B 2A3 |
US$125 each US$125 each |
| Plate cap types | EL509 807 |
US$99 each US$99 each |
| Tube Types used without adapter | 6L6, 5881, EL34, 6V6, 6550, 6CA7, 7581, KT88, KT90, KT100 | |
|
Phone: 206.633.5190 Fax: 206.633.0803 |
MaxiTest LLC 125 North 36th St Seattle, WA 98103 |
Email Maxi-Test email: info@maximatcher.com |